Movie
1. Select the video play function on the main interface, and press
MENU
to enter.
2. Use
to select the video to play. Press
to start playback.
3. Supported resume play from the last breakpoint.
4. Under the halted state, press
MENU
to enter the menu options, including
Local folder,
Delete file, Delete all, Repeat, and Exit.
The functions and operation methods are the
same as that of music application.
Recording
Select Record on the main interface and press
MENU
. Press
to start/pause/restart
and continue the recording. Hold
to save the current recording content, and be ready
for new recording. After holding
MENU
, the system will automatically save the current
recording contents, and then back to the main interface.
If the low-power signal appears in the process of pause mode, the system will
automatically save the recording content and go back to the recording function interface.
Press
MENU
to enter the menu options, including
Local folder, card folder, REC
(Recording) type, record and Exit.
Voice Play
The voice play function operation is the same as that of music play.
FM Radio
Note: Plug earphones in to listen to the radio.
Press
/
to choose FM mode, short press
MENU key
to enter this option. There
you can choose between: save, record, delete, delete all, auto-search and exit.
In Normal radio mode, press
/
for radio tuning;
Press
to switch from Normal radio mode to Preset radio mode:
Photo browser
Press the
MENU key
on the main interface to enter the picture browsing.
Press
to select the picture to view.
Press
to view the picture browsed, and press it again to exit.
Press
/
to browse pictures back and forth.
After pressing “MENU”, you will find the following sub-menu: card folder, Playback set,
Delete file, Delete all and exit.
Play setting
Manual play
: in case you need to manually play each picture, press
or
to view
the previous or next picture.
Auto play
: after the entry, adjust the time interval (2-10s) for automatic play in “Playback
set” and selecting “auto play” and press
MENU
to confirm and exit.
System settings
1. System time
: press
Volume control
to switch among the options of Second, Minute,
Hour, Day, Month and Year, press
or
to adjust the value, and press
MENU
to
save the settings.
2. LCD (Screen) settings: