ST4345 User Manual
6
<example>
[command] ST4345NTW;850000;02;0;internet;;;111.111.111.111;8600;;;;
[response] ST4345NTW;Res;850000;010;0;internet;;; 111.111.111.111;8600;;;;
ST4345NTW;Res;850000;010;
A1;tim.br;tim;tim
; 111.111.111.111;8600;;;;
<notes>
** If network does not require User ID and Password, these fields should be empty.
Automatic LTE-M1 Set
It the device is set to ‘Automatic LTE-M1 Set’, the device set LTE-M1 parameters automatically depending on
inserted SIM.
For example, if Airtel SIM is inserted, the device set AUTH to 0, APN to “aitelLTE-M1.com”, USER_ID and
USER_PASS to empty.
And the device reports response string after adding real LTE-M1 parameters when automatic LTE-M1 set is
selected.
4-2. Report Parameter Setting
HDR DEV_ID
VER
T1
T2
T3
A1
SND_DIST
T4
SMS_T1
SMS_T2
SMS_PACK_NO
ANGLE_RPT
RPT_TYPE
● Definition
: Set parameters related on report interval.
Field
Definitions
Unit
Remark
HDR
“ST4345RPT”
Command type
DEV_ID
6 char.
Device ID
VER
“02”
Protocol Version
T1
String
Sec
Interval for sending status report in parking mode
Range : 0 ~ 86400
If 0, report in parking will be sent only one time when
vehicle starts parking.
T2
String
Sec
Interval for sending status report in driving mode
Range : 0 ~ 60000
If 0, report in driving will be sent only one time when
vehicle starts driving.
