SPEED
Flame speed button
:Controls the speed
of the flame.There are 3 flame speed
settings: 01 (slowest), 02 (Medium), 03
(fastest).
1.
Press once
. Flame speed gets changing.
2.
Press again
until desired setting is
reached. Display shows the setting.
The Default setting is 02 (medium speed)
FLAME
COLOR
Flame color button
: Makes the color
flame effect changing.
NOTE:
color effect stays on until power
button is turned off. Color flame effect
must be on for heater to turn on.
NOTE:
this fireplace is with memory
function for flame.
1.
Press once
. Flame color effect gets
changing.
2. Press again until desired setting is
reached. In total 6 colors for flame.
EMBER
LIGHTS
LED Ember light button
: Makes the
color on bottom effect gets changing.
NOTE:
Ember color effect stays on until
power button is turned off.
NOTE:
this fireplace is with memory
function for LED ember lights.
1.
Press once
. LED ember light color effect
gets changing.
2.
Press again
until desired setting is
reached. In total 10 colors for EMBER.
3.
Auto-cycle function:
When pressing with
the
11
th
time, the LED ember light will do
auto-cycling
(NOTE: It will take 15
seconds to switch between colors.)
EMBER
BRIGHTNESS
LED Ember light brightness button
:
Makes the LED ember lights on bottom
effect gets changing.
NOTE: LED
Ember light brightness effect
stays on until power button is turned off.
1.
Press once
. LED ember light color effect
gets changing.
2.
Press again
until desired setting is
reached. In total 5 levels.
From L1 - L2 - L3 - L4 - L5
Remote Control Operation