FLAME
BRIGHTNESS
FLAME button
: Makes flame
effect dimmer and brighter.
NOTE:
Flame effect stays on until
power button is turned off. Flame effect
must be on for heater to turn on.
1.
Press once
. Flame brightness
effect gets changing.
2.
Press again.
until desired setting
is reached.
EMBER
LIGHTS
LED Ember light button
: Makes the
color on bottom effect gets changing.
NOTE:
Ember color effect stays on until
power button is turned off.
NOTE:
this fireplace is with memory
function for LED ember lights.
4.
Press once
. LED ember light color effect
gets changing.
5.
Press again
until desired setting is
reached. In total 10 colors for flame.
6.
Auto-cycle function:
When pressing with
the
11
th
time, the LED ember light will do
auto-cycling
(NOTE: It will take 15
seconds to switch between colors.)
EMBER
BRIGHTNESS
LED Ember light brightness button
:
Makes the LED ember lights on bottom
effect gets changing.
NOTE: LED
Ember light brightness effect
stays on until power button is turned off.
3.
Press once
. LED ember light color effect
gets changing.
4.
Press again
until desired setting is
reached. In total 5 levels.
From L1 - L2 - L3 - L4 - L5
NOTICE
When the heater is first turned on, a slight odor may be present. This is normal and
should not occur again unless the heater is not used for a long period of time.
NOTICE
To improve operation,
aim
the remote control at the front of the fireplace.
DO NOT
press the buttons too quickly
. Give the unit time to respond to each command.
Temperature Limiting Control
This heater is equipped with a Temperature Limiting Control. Should the heater reach an unsafe
temperature, the heater will automatically turn OFF. To reset:
1. Unplug the power cord from the outlet.
2.
Turn the ON/OFF switch on the CONTROL PANEL to OFF.
Wait 5 minutes.
3. Inspect the fireplace to make sure no vents are blocked, or clogged with dust or lint. If they are,
use a vacuum to clean the vent areas.
4. With the POWER switch in the OFF position, plug the power cord back into the outlet.
5. If the problem continues, have your outlet and wiring inspected by a professional.
