10th
3.5. RX TX Mode:
TX Master
- A Master may provide a wireless data connection to many slaves
RX Slave
- A Salve may sustain one wireless connection,i.e. to an Master.
3.6. TX Power
（
Default
：
30dbm
）
:
This setting establishes the transmit power level which will be presented to the
antenna connector of the TDD_COFDM.Unless required, the Tx Power should be
set not for maximum, but rather for the minimum value required to maintain an
adequate system fade margin.
4. Seria Configuration method:
4.1. Data Baud Rate
（
Default
：
115200
）
:
The serial baud rate is the rate at which the modem is to communicate with the
attached local asynchronous device.
921600/460800/230400/115200/57600/38400/28800/19200/14400/9600/7200/4
800/3600/2400/1200/600/300.
