10th
3) The best installation position is center of UAV tail, prominent outside the body and vertical downward.
4) The second optional mounting position is located below the wing and body joints, vertical down, as far as
possible away from the wing but near the machine abdomen, protruding below the abdomen level.
VII. Software Operation
7.1. Two ways for changing the parameters
The parameters can be changed by software SUNTOR supplied such as bandwidth, code stream and so on. Two
windows for device on board and ground station can be operated at the same time to do monitoring or setting. The
SNR (db) / RSSI (dbm) will be updated in real time.
Notes
：
As for one pair of our devices, their parameters should be consistent, which means when you
change one of them, you have to change another one, or they will lose connection.
There are two ways to modify the parameters .
Solution 1.
Connect Transmitter and Receiver separately to PC, then change their parameters one by one.
