11th
Solution 2.
Make sure communication between TX and RX is successful, connect TX with PC to changing another one
RX parameters by input its IP address firstly. After changing finsh, the communication will fail. Becasue the
parameters of TX and RX are different now. Secondly, change the TX parameters. After the changing is ok, the
communication will be successful again. If you connect the PC with RX, you need to change the TX parameters firstly,
then is the RX parameters.
7.2. How to use the software
7.2.1. Login
1
Open the TDD software
2
Inputthe IP address
(TX Default IP: 192.168.55.1)( RX Default IP: 192.168.55.2)
3
Next click Connect TDD button.
