ST6200BM User Mannual
Part 1. Safety Caution
Before using this system, please carefully read the following precautions.
please not put the RX antenna near the wall or metal objects.
Please not open the enclosure for any operation without SUNTOR approval.
Before turning on the TX and RX, make sure the antennas are in good connection.
During application, the distance between RX and TX need to be longer than 10meters.
Make sure no any metal objects to enter the system shell
Do not remove the antenna with power. Disassemble the antenna when power off.
Make the video source away from the antenna, and the video line as far as possible
below the antenna.
Before using, make sure the battery is full charged. If the power is low, the system will be unstable and the video will
be discontinuous.
The transmitter is powered by DC, please attention the Positive and negative
Remark:
All the settings are configured before shipping. Do not change the parameters
without permission.
Part 2. Device Parameter List
NO.
Name
Model
Qty Description
1
TX
Transmitter
ST6200BM TX
1
Mini Size
Antenna
TQX-10S
1
This antenna will connect with transmitter
Antenna
Extension Cable
Standard
Configuration
1
To extend the antenna
HDMI Cable
1
Connect the camera and the transmitter
2
RX
Receiver
ST6200BM RX
1
To receive the video and audio
Antenna
TQC-350DII
1
Connect with the receiver
HDMI Cable
1.8meters
1
Connect Receiver with Display
1. Transmitter
