Suntrap ST-160-16 Installation Instructions And Owner'S Manual Download

Page: 6 / 22

Mains water supply:

The system is fitted with a water pressure limiting valve (connected to the DuoValve at point C). This ensures that the tank is never
under excess pressure. The valve is rated at 500 kpa and must never be changed for a higher rating.

Installation of the Solar Hot Water Tank and Solar Collectors:

The Solar Hot water tank and the Solar Collectors are provided as part of the Suntrap Solar Hot water kit, and all components must
be installed, maintained and operated as per instructions otherwise all warranties are null and void.

3. Suntrap Solar Hot Water Kits - Parts Supplied

The Suntrap Solar Hot Water Kits:

All kit components must be used as per supplied. The kit of parts include sub-assemblies which must be fitted complete as supplied.
Suntrap Pty Ltd reserves the right to vary the kit contents and components at its discretion at any time.

There are 10 Suntrap Kits as follows:

(Please note that there are 16 glass evacuated tubes per solar collector.)

Roof space required for Solar collectors:

1 x solar collector     1.2 meters wide x 1.8 meters high
2 x solar collectors   2.4 meters wide x 1.8 meters high
3 x solar collectors   3.6 meters wide x 1.8 meters high

Electric Boost Models:
ST-160-16: 160 litre solar hot water tank with 1 solar collector and electric boost -

1140mm (h) x 580mm (dia)

ST-250-32: 250 litre solar hot water tank with 2 solar collectors and electric boost-

1620mm (h) x 580mm (dia)

ST-315-32: 315 litre solar hot water tank with 2 solar collectors and electric boost-

1980mm (h) x 580mm (dia)

ST-250-48: 250 litre solar hot water tank with 3 solar collectors and electric boost-

1620mm (h) x 580mm (dia)

ST-315-48: 315 litre solar hot water tank with 3 solar collectors and electric boost-

1980mm (h) x 580mm (dia)

Gas Boost Models:
ST-160NG21-16 / ST-160LPG21-16: 160 litre solar hot water tank with 1 solar collector and gas boost -

1140mm (h) x 580mm (dia)

ST-250NG26-32 / ST-250LPG26-32: 250 litre solar hot water tank with 2 solar collectors and gas boost-

1620mm (h) x 580mm (dia)

ST-315NG26-32 / ST-315LPG26-32: 315 litre solar hot water tank with 2 solar collectors and gas boost-

1980mm (h) x 580mm (dia)

ST-250NG26-48 / ST-250LPG26-48: 250 litre solar hot water tank with 3 solar collectors and gas boost-

1620mm (h) x 580mm (dia)

ST-315NG26-48 / ST-315LPG26-48: 315 litre solar hot water tank with 3 solar collectors and gas boost-

1980mm (h) x 580mm (dia)

For 1 x solar collector

(ST-160-16: ST-160NG21-16 / ST-160LPG21-16)

Part/n – SET116

1 x complete Suntrap evacuated tube Solar Collector with 16 x evacuated glass tubes

Part/n – SSF001

4 x square sections of stainless steel for Roof Frame (top, bottom and 2 sides)

Part/n – MOU001

4 x brackets and 24 screws for assembling the Roof Frame, 2 x left hand, and 2 x right hand
collector brackets to connect the solar collector to the Roof Frame, 4 x nuts and bolts and
4 x screws for the collector brackets, 4 x stainless steel straps for attaching the Roof Frame
to the roof, 4 x screws for attaching the stainless steel straps to the Roof Frame, 8 x roof screws
for attaching stainless steel straps to the roof rafters.

There are no interconnecting solar collector components required for this system