24
Model SF:
Raise the Slide Fork.
(3)
Improper weight balance:
Lay the machine on the stairs with Main Wheels a
little aloft.
If the top of the machine (handle side) is floated,
the center of gravity should be in the bottom side.
Danger will result. Reload Cargo with its center of
gravity on the upper side of the machine. If it is
difficult to shift the center of gravity to the upper
side, maintain pressure on the handle dounward by
applying the operator's weight.
［
Model SF
］
Set Select Switch to TOE PLATE and raise Slide
Fork Unit the center of gravity is within the proper
range.
(4)
Start ascent
①
After the proper weight balance is confirmed, set
Select Switch to DRIVE.
②
When UP is pressed, the machine will start ascent
operation.
• Before starting the ascent operation, be sure to confirm
that there is no dangerous situation behind the operator.
• Be sure to press the handle downward to prevent ma-
chine toppling. If it is difficult to keep the handle by
operator's own force, check the weight balance again
or avoid using the machine for such cargo.
①「
DRIVE
」
②「
UP
」
Switch Box
Hold the
Handle.
Ascending
