29
Model SF:
Raise the Slide Fork.
(3)
Improper weight balance
If the top of the machine (handle side) is aloft, the
center of gravity is on the bottom side. Danger will
result. Reload Cargo with its center of gravity on
the higher side of the machine. If it is difficult to
shift the center of gravity to the higher side, main-
tain pressure on the handle toward the stairs by ap-
plying the operator's weight.
［
Model SF
］
Set Select Switch to TOE PLATE and raise Slide
Fork Unit the center of gravity is within the appro-
priate range.
(4)
Start descent
①
After the proper weight balance is confirmed, set
the Select Switch to DRIVE.
②
When DOWN is pressed, the machine will start
descent operation.
• Before starting descent operation, be sure to confirm that
there is no dangerous situation in front of the operator.
• Be sure to press the handle perpendicularly toward the
stairs to prevent machine toppling. If it is difficult to press
the handle, check the weight balance again or avoid
using the machine for such cargo.
Switch Box
①「
DRIVE
」
②「
DOWN
」
Hold the Handle.
