OPERATION & MAINTENANCE MANUAL SWE18UF
23
e-
slew the upper structure anticlockwise
f-
slew the upper structure clockwise
g-
extend the arm
h-
retract the arm
Composite operation can be achieved by the assorted
operations of the two joysticks.
The horn button is equipped on the joystick.
Dozer control (chassis extension/retraction) pedal
This control lever can control the dozer by the
composition operation with the transfer switch of dozer
blade and undercarriage extension & retraction on the left
control box.
(A)
－
lift the dozer
(B)
－
lower the dozer
D. Travel control lever
Make sure that the dozer is at the foreside of the
operator’s seat before operating the traveling control
lever. Reverse the control lever when the dozer is at the
back of operator’s seat.
The travel control lever can operate the machine go
forward or backward or change the direction of traveling.
Refer to the page of “operation of travel handle”.
E. Boom swing control pedal
This pedal is used to control the boom swing.
(A) Boom swing to the right
(B) Boom swing to the left
