Sunwave Tech. SR1200, Instructions For Use Manual

4

GB

Congratulations! Your Universal Remote Control (URC) is a state-of-the-art 
device which integrates many different Infra-red remote controls to deliver 
instant A/V control action to your fingertips.

Before operating the remote, please read thoroughly 1) descriptions of the 
coversheet and 2) this manual. Then, reserve them for future reference.

1.   Crescent STAR - Universal Remote Control
2.   USB Cable
3.   Instruction For Use (IFU)

• 

Microsoft Windows XP/Vista/7

• 

512MB RAM & 300MB Free Disk Space

• 

Available USB2.0 Port x 1

• 

Installed Microsoft Internet Explorer 8.0

• 

Established Reliable Internet Connection
Remarks: Due to security reason of Microsoft Windows Vista/7, the set-
up program and drivers of your URC will not be executed automatically 
(Program  auto-run  is  prohibited).  Please  double  click  the  pop  up 
window – CD ROM Drive – KRMAP and the KRMAP.exe to install the 
program and drivers manually.

Your URC can replace up to 8 original A/V remote controls. Before your URC 
can operate your A/V devices, firstly you have to register your URC. Then, 
you can go through one of the following SIMPLE set up procedures to set 
up your URC.

PACKAGE CONTENTS

PC SYSTEM REQUIREMENTS (MINIMUM)

Alkaline  batteries  are  always  recommended.  The  number  of  battery 
required is stated on the back side of the package coversheet.

1.   Remove the battery cover on the back side of your URC.
2.   Observe  the  polarity  of  the  batteries  and  the  “+/–“  marks  inside  the 
 

battery compartment.

3.   Insert the batteries accordingly.
4.   Push the battery cover back in place.

Remarks:  Whenever  you  see  the  LED  indicator  of  your  URC  flashes  3 
times after you press any key, it tells your URC batteries are running out. 
Please replace with the new and fresh alkaline batteries to ensure proper 
operation and performance.

HOW TO INSTALL BATTERIES

HOW TO SET UP THE URC