Synway Information Engineering Co., Ltd
SMG Series Analog Gateway User Manual (Version 1.5.3)
Page 15
Receive Packets
The amount of receive packets after the gateway’s startup, including three
categories: All, Error and Drop.
Transmit Packets
The amount of transmit packets after the gateway’s startup, including three
categories: All, Error and Drop.
Current Speed
The current speed of data receiving and transmitting.
Work Mode
The work mode of the network, including four options: 10 Mbps Half Duplex, 10
Mbps Full Duplex, 100 Mbps Half Duplex, 100 Mbps Full Duplex.
Runtime
Time of the gateway keeping running normally after startup, which will be
automatically updated.
WEB
Current version of the WEB interface.
Gateway
Current version of the gateway service.
Serial No.
Unique serial number of an SMG analog gateway.
U-boot
Current version of Uboot.
Kernel
Current version of the system kernel on the gateway.
Note:
The kernel version for the gateways with RJ45/RJ21 interface is different
from that for the gateways with RJ11 interface.
Product Type
The type of the analog gateway.
3.2.2 Channel State
Figure 3-6 Channel State Interface
See Figure 3-6 for the channel state interface where shows the channel type, the voltage and the
channel state for each channel on the gateway. The table below explains the items shown in
Figure 3-6.
Item
Description
Channel
Channel number on the device.
Type
Type of the channel on the device: FXS or FXO. If this item shows ---, it means this
channel is unavailable, that is, the corresponding module to this channel is not
inserted or damaged.