25
Operation
8.0 Operation
8.1
Switching the Main Unit On/Off
•
Connect the power cable to the power socket and
to a suitable socket-outlet.
•
To switch the main unit on, set the power switch
to “I” position.
•
To switch off, set the power switch to “O”
position.
•
After use, switch off, then unplug the device from
the socket-outlet.
8.2
Charging the Hub
•
Open the charging port of the hub.
•
Connect the type C end of the charging cable
(USB) to the charging port and the other end to
the USB port.
•
After charging, unplug the hub and the charging
cable (USB), then close the charging port.
NOTICE
Only use the charging port of main unit to
charge the hub.
NOTICE
The hub can also be charged using a 5 V,
2 A charger (not included).