The Setting Time of Image-Display:
45 Seconds each time
Effective Transmission Distance 57.5ft (17.5m) Max.
(Installed in vehicles for test)
If the monitor doesn't display images within a few
seconds after touching the starting button:
3. If cannot display image after the two methods speaking above, please
try re-pairing:
Shortly press MENU key, long press MENU key to confirm the pairing
state when it is turned on. Under normal circumstances, the pairing will
2. In the process of use, there is wireless interference from outside. so if
you can't turn on the camera over 10 seconds after touching, please
touch the
Touch-Sensor
again to turn it on.
1. The battery in the camera may be depleted and require recharging.
1. Check to make sure the power source is active (if your cigarette lighter
is switched with vehicle ignition, your monitor will only work when the
engine is running or the key in the ON position).
2. Check to make sure the fuse and power cord are in working order.
10.
09.
WSU43+
When the monitor is powered on and still stay standby mode, the Red
indicator Light doesn't work. When touching
Touch-Sensor
, the Light will
blink quickly. When the monitor works, the light will extinguish.
the setting time
- 13 -
- 14 -
