49
Fig. 5.7-1:
Mounting height on an AGV
Depending on the application, further additions may be necessary. Additional information
is available in Chapter 5.7.6.
5.7.5
The creation of unmonitored zones is dependent upon the following factors:
If the detection zone of a
SD3-A1
mounted on an AGV does not cover the entire front of
the vehicle, you can prevent the creation of unmonitored zones by changing the
installation depth of the scanner or by adjusting the angle range (from 180° to 190°).
Recommendations for mounting to prevent unmonitored zones
x
the vehicle width
x
the design of the vehicle (e.g. attachments, shape)
x
the position of the scanner
x
the installation depth
x
the selected angle range.
Summary of Contents for SD3-A1
