●
Plug the main connector “T” into “M” on the frame.
●
Plug in the battery connector “L1” into “L2” on the frame.
●
The connectors are color matched. Don’t try to force it into the wrong
position.
●
Inflate the tyres to a maximum of 40 PSI.
IT IS IMPORTANT THAT YOU TAKE EXTRA CARE TO PRACTICE
IN AN OPEN SPACE AWAY FROM OBSTRUCTIONS.
- 17 -
ANTI-TIP WHEEL
Ensure that the anti-tip wheels are extended and locked in either
position “Q” or “R” when driving on sloping ground. (As per illustration
below)
To change the lock position, just pull the knob “Q” and slide the tube to
the preferred position. Position “Q” provides the greatest stability.
Return the sliding tube to position “P” for transportation or dismantlin
g
.
●
Do not turn key switch “On” before you are seated ready to go.
●
Always turn the key switch “Off” before getting off. The scooter.
NOTE
: Please be aware that should the scooter wheels meet an
obstruction, you will need to help it out manually. Attempting to drive
through an obstruction when the wheel is stuck could result in
damage
- 18 -
