SWIVEL SEAT (OPTIONAL)
When removing the seat, do not lift the turning release handle as this
could cause the seat support frame to disconnect from the seat and
fall.
To turn the seat, lift and hold the turn release handle below the seat (as
shown). This will allow the seat to turn.
- 23 -
SPARE BATTERY TRAY (OPTIONAL)
Assemble the battery tray as illustrated. Insert the screws and tighten
the nuts.
When using a lithium battery it is recommended that you place your
lithium battery on rear tray of the scooter and your SLA battery on the
front tray.
It is also recommended that you use the lithium battery and keep the
SLA battery in reserve.
NOTE:
The battery gauge on the scooter does not give accurate readings
when using a lithium battery.
- 24 –