Frame Assembly
Assembly and disassembly is best carried out by pulling the locking
pin C and allowing the tiller assembly to fold forward until it
rests on the ground.
●
Pull the lock pin knob (V) and turn it to the “lock” position.
●
Hold both frame sections horizontal by using the strap (T) with one
hand and the rear section with the other hand and slide both together
by inserting the tubes (U) into the corresponding holes in the front
frame.
●
The pin will click when inserted correctly.
You must check that the
pin has locked into position.
●
Reconnect plugs.
- 13 -
●
Fit the seat on to the frame, inserting the seat frame tubes into the
corresponding holes on the main frame.
- 14 -
