background image

Table of contents

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SAVE THIS MANUAL FOR FUTURE REFERENCE. 

 
- 1 -   

INTENDED USE

 

 

Intended use of device

 

 

As a motorized portable electric vehicle for indoor or outside use 

   

 

 

by

 

persons with mobility conditions that require assistance.

 

 

 

Device description

 

A battery operated lightweight 3 wheel portable mobility device 

designed for using indoors and limited outdoor use.

 

It is used in a sitting position and operated by a hand controlled 

throttle located on the handle bars. Brake is automatically controlled 

when releasing the throttle by the electronic controller and magnetic 

motor brake.

 

The product is supplied ready to use with a battery and charger and   

it can be disassembled and folded for transport. 

 

 

 

Technological characteristics

 

Unique one piece folding frame designed to suit users up to 120kgs. 

The compact design and minimal component weight are of   

significant benefit to the elderly who are independent and have a 

need to transport the scooter in a motor vehicle. The electronically 

controlled speed reduction system which operates when turning is a 

valuable safety features for all users.

 

 

 

 

 

- 2 - 

Contents                                                                                  Pages 

  Intended use- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -2 
  Safety Symbols, Words and Labels - - - - - - - - - - - - - - - - - - - - 3 
  Safety  Instructions  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  4-7 
  Electromagnetic Interference - - - - - - - - - - - - - - - - - - - - - - 8-10 
  Assemble the Seat - - - - - - - - - - - - - - - - - - - - - - - - - - - 11 
  Foldable Seat Frame - - - - - - - - - - - - - - - - - - - - - - - - - - - 11-12 
  To Open the Supalite 4 - - - - - - - - - - - - - - - - - - - - - - - - 13-15 
  Anti-Tip Wheel- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -16 
  Arm Rest - Optional - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 17 
  Seat  Post  Clamp  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -18 
  Basket - Optional - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18 

Flat Pack Kit: (optional) - - - - - - - - - - - - - - - - - - - - - - - - 19-20 

  Spare Battery- (optional) - - - - - - - - - - - - - - - - - - - - - - - - - - - 20 
  Drive Wheel Release Mechanism- - - - - - - - - - - - - - - - - - - - - 21       
  Cruise Control, Lights and Switches - - - - - - - - - - - - - - - - 22-23 
  Auto Switch Off Electronic System - - - - - - - - - - - - - - - - - - - 24 
  Electronic Stability Control (ESC) - - - - - - - - - - - - - -- - - - - - - 25 
  Precaution - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 26 
  How To Clean the Scooter - - - - - - - - - - - - - - - - - - - - - - - - - -27 
  How To Close the terminal cover of battery - - - - - - - - - - - - - - 27 
  Fold the Supalite 4 - - - - - - - - - - - - - - - - - - - - - - - - - - -28-29 
  Charge Battery - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 30-32 
  Battery Charger - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 33 
  Instructions for using battery Module - - - - - - - - - - - - - - - - - - 34 
  Battery Care & Storage - - - - - - - - - - - - - - - - - - - - - - - - - 35 
  Battery Safety Instruction - - - - - - - - - - - - - - - - - - - - - - - - 36-37 

Specifications - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -38   
SupaLite 4 Warranty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 39 
Purchaser information- - - - - - - - - - - - - - - - - - - - - - - - - - - - -40                                                                                     
 
Manufacturer: EUROGREEN INTERNATIONAL INC.

 

No.48, Ln. 220, Sec.1, Fuzun Rd, Yuanlin Township, Changhua 
County, 51055, TAIWAN 

Summary of Contents for SupaLite






















Reviews: