BOX CONTENTS
Tone-arm
Pillar & base
Counterweight
Inertia adjuster
Base bolts
Heavy bias weight
Cable
Downforce scale
Rigid finger-lifter
Spare filaments and toggles
Safety gloves
3 Allen keys
Spanner
Screwdriver
Tweezers
Protractor
Instructions & warranty
CARRIAGE
To transport a turntable short distances
with your Sideways Uni-Pivot Arm attached
it is recommended that you…
1. place a folded handkerchief or other
cushion between the pivot point and
thrust plate
2. stabilise the arm with a support or tape
3. attach a stylus guard
For longer journeys it is recommended that
you remove the arm from the post so that it
can be packed separately. See the section
on ‘Disassembly’.
4
INSTALLATION
Install Base
Attach the base to the arm board or plinth
of your turntable using the M5 bolts
provided. The base should be tightly
coupled to the arm board, but not so tight
as to mark or damage it.
If you need longer or shorter bolts, M5 steel
bolts are easily obtained.
5
base
base bolts
