4
5. Slip Inner Axle Bushing (#37) onto the right side of the axle, pushing the Inner Axle Bushing
into the Outer Axle Bushing until tight. Attach Wheel (#36) to the right side of the axle by inserting
a M5 x 45 bolt (#47) and fastening with Lock Nut M5 (#44). Attach Axle End Cap (#35) by tapping
with a wooden or rubber mallet.
b) Slip Inner Axle Bushing (#37) onto the left side of the axle, pushing the Inner Axle Bushing
into the Outer Axle Bushing until tight. Push the Wheel onto the axle. Insert Flat Washer Ø 16
(#34) and attach Axle End Cap (#35) by tapping with a wooden or rubber mallet. NOTE: The nuts
and bolts do not have to be completely tightened yet.
Note: Insert the Inner axle bushing
into the outer axle bushing and make