6
8. a)
Push the Adjustable Handle (#6,#7) to the lowest position.
b) Insert the upper end of the Control Rod (#25) into the hole at the end of the Adjustable
Handle (#6,#7).
c
)
Take lower nut (#21) off the bottom end of the Control Rod (#25) and insert rod into the hole
in the Pivot and Bracket Assembly (#19).
d)
Screw nut back into place.
9.
Slip the threaded end of Adjustable Connecting Rod (#46) into the Shut Off Plate (#27) with a
Flat Washer Ø6
（
#48
）
, then fasten with Flat Washer Ø6
（
#48
）
and Lock Nut M6 (#24).
