13
Be in charge.
Super B.
4.3.1. Placement of the Li-ion battery
Before it is used, the Li-ion battery must be positioned in such a way that it will not move
around in its compartment during use.
Use appropriate brackets for mounting (see chapter 3.6 for optional components).
4.3.2. Connection wires
Use appropriate wire for the connection wires to prevent overheating and unnecessary
losses.
4.3.3. Connecting a charger or load to the Li-ion battery
1. Connect the load or charger to the (+) terminal of the Li-ion battery (Figure 3).
!
Warning!
Do not connect the (-) terminal first as this may lead to short circuits.
2. Connect the load or charger to the (-) terminal of the Li-ion battery (Figure 3).
3. Ensure both contacts are tightened (M6 = 10Nm).
!
Warning!
Avoid short circuit when using a wrench.
4. Place the terminal covers over the terminals (Figure 4).
5. Connect the charger to the Li-ion battery (Figure 5).
Figure 3. Connecting power cables to the Li-ion battery.
