My Lite X3 - 3000mw RGB Laser - Instruction Manual Ver:2019.04.18
3
/
16
Latest file to download
Safety warning
When unpacking and before disposing of the carton, check if there is any transportation
damage before using the product. Should there be any damage caused by transportation,
consult your dealer and do not use the apparatus.
This equipment is not waterproof, keep it from rain, moisture and liquids.
Do not install the product or project the beam onto inflammable surfaces. Minimum distance
is 5 M
The product is only intended for installation, operation and maintenance by qualified
personnel.
Product should install in a cool place. Keep away from the wall 50cm
Avoid direct exposure to the light from the lamp. The light is harmful to eyes.
Keep the optical system clean. Do not touch the laser reflect lens with bare hands. Do not use
any alcohol liquid or any other liquid to clean the optical system. Use medicinal absorbent
cotton to clean it.
Please do not attempt to dismantle and/or modify the product inner structure. Otherwise,
would not provide 1 year of free warranty.
Electrical connection must only be carried out by qualified personnel.
Before installation, ensure that the voltage and frequency of power supply match the power
requirement of the product.
It is essential that each product is correctly earthed and that electrical installation conforms to
all relevant standards.
Do not connect this device to any other types of dimmer apparatus.
Make sure that the power-cord is never crimped or damaged by sharp edges. Never let the
power-cord come into contact with other cables. Only handle the power-cord by the plug.
Never pull out the plug by tugging the power-cord
There is no user serviceable parts inside the product, do not open the housing and never
operate the product with the cover removed.
If you have any questions, don't hesitate to consult our dealer or manufacturer.
Webpage
Latest Datasheet
Cad Drawing
3D Module
