40
www.supercircuits.com
SECTION 5: NETWORKING YOUR DVR
In the
Internet Options
window, click
Apply
, then click
OK
to close the window.
NOTE
If your computer operating system is Windows Vista or Windows 7, User Account Control can interfere with the normal operation
of the DVR user interface. To disable UAC, open the Control Panel > User Account > User Account window, clear the
Use User
Account Control (UAC) to help protect your computer
check box, then click
OK
. A computer restart may be required.
4. In the IE URL field, enter the IP address assigned to your DVR with the WEB PORT number configured in your DVR (in the
example above, the default WEB PORT is 8090). Using the example shown above, enter:
192 .168 .1 .100:8090
NOTE
After sending the URL, IE may prompt you to load the Chinese Simplified language pack. You can click Install or Cancel. If you click
Cancel, the message will reappear again when you logout and login.
5. During the first connection to the DVR, a security warning to install software appears. Click
Install
and follow the on-screen
instructions to complete the installation.
