65
H.264 Video Surveillance System Setup Guide
For NTSC video output format, the default system resolution and frame rate is CIF @ 30 fps. With this setting, the system will record
120 fps with all channels. The frame rate can be set from 1 fps to 30 fps per channel.
8.3.6 Audio
Select OPEN or CLOSED. OPEN indicates that the audio recording for all channels is enabled; CLOSE indicates that audio recording is
disabled.
8.3.7 Packtime
Record Pack Time is the time length of video segments saved during the backup of recorded video to an external device when alarm
recording is disabled. There are four options: 15 min, 30 min, 45 min, and 60 min.
8.3.8 Record Mode
Record mode includes two general categories:
ALWAYS
and
SCHEDULE
.
ALWAYS
: indicates that the DVR will record the channel selected continuously.
SCHEDULE
: This setup allows you to create a weekly schedule for recording. This assures that only selected events are
recorded on the HDD. For example, you may set up the system to record continuously during business hours, record at lunch
time only when an alarm is triggered, and record at night when motion is detected and/or an alarm is triggered.
NOTE
: Manual recording continues until stopped by the operator. It overrides all settings.
CHANNEL
: You can select all channels or just one channel. There are three modes for recording: ALARM, NORMAL and NO RECORD.
Different colors indicate different recording modes: Red indicates alarm record, green indicates normal record, gray indicates no
recording.
SECTION 8: DVR SYSTEM MENUS REFERENCE
