68
www.supercircuits.com
SECTION 8: DVR SYSTEM MENUS REFERENCE
8.4.9 Video Setup
Click
Video Setup
[
System settings -> Video
->
Video Setup
] to open video setup menu.
VGA (display resolution)
: Options include 1024 x 768 (XGA) and 1280 x 1024 (SXGA).
NOTE
The DVR will restart if the display resolution is changed.
Sequential Time (SEC)
: This sets the pause time when auto-sequence is enabled. Value: 1 – 300 seconds.
Channel
: Select the channel to setup for privacy. Privacy areas are configured through the Area Covered options.
Area Covered
: Set privacy area. Up to four areas of privacy can be configured for each channel. Privacy areas appear as black
rectangles over portions of the video image that are setup as “private.”
8.5 Network
Move the cursor to
NETWORK
(the icon will be highlighted when selected), and press
ENTER
to open the Network configuration
window. In this window, you can configure network, DDNS, email, and mobile access settings.
NOTE
The default IP addresses and port settings of your DVR may be different from those shown in this document. Always use
network settings that are compatible with your network(s).
