84
www.supercircuits.com
APPENDIX B: TROUBLESHOOTING
$
Cannot login to the DVR through IE (across a network).
•
Verify that the DVR is connect to the network.
•
Check if LINK or 100M LED is displayed normally on the panel;
•
Use the ping command (ping <DVR IP address>) to verify that you can connect to the DVR.
•
Check if the Internet is linked properly.
•
Verify that you are using Windows XP or later, and the Microsoft IE 6.0 browser or later.
•
Verify that the ActiveX control control has not been blocked. Check your Internet security settings and the guidelines in this
manual.
•
Very that you are using DirectX 8.1 or later.
