25
26
Use UHU glue to secure F23 inside the F6
(firewall) for reinforcement.
Move the F23 to the top and make sure the
reinforcement is strong enough. It is also
workable to use AB glue for securing, but
it will add some weight and won't allow
any mistake during gluing.
Use UHU glue to secure the F24 inside for
reinforcing the gear mount.
Try to fit the F27 inside the fuselage with
the Tee nut face upward. Use instant glue
to secure the F27 in place.
Drop some instant glue on two sides of
F27 and spread some AB glue on them for
better securing.
Use UHU and instant glue to secure the
F25 on the bottom of the head fuselage.
Use UHU glue to secure the F26 on the
center part of the gear mount.
Use sanding paper to trim the parts on the
top of head fuselage.
Use sandingpaper to trim the sides of the
fuselage.
Use sanding paper to trim the edges of the
bottom into round edges (R3); also trim
the uneven parts on the gear mount and
bottom cover.
Close view of the round edges R3.
Use sanding paper to trim the edges into
round edges on the bottom of the tail
fuselage.
