PRE-RIDE SAFETY CHECK
Get to know the feel of your scooter and its capabilities. We recommend that you perform a
safety check before each use to make sure your scooter operates smoothly and safely.
Perform the following inspections prior to using your scooter:
• Check the condition of the tires. Make sure they are not damaged or excessively worn.
• Check the folding clasp. Make sure it’s locked properly.
• Check all electrical connections. Make sure they are tight and not corroded.
• Check handle-bar and seat connections. Make sure they are secured properly.
• Check the brakes to ensure they operate properly.
• Check the battery LED display to ensure the battery is fully charged.
• Ensure the parking brake is engaged before sitting on the scooter.
BEFORE GETTING ONTO YOUR SCOOTER
• Have you fully charged the battery?
• Ensure the folding clasp is in the locked position.
• Ensure the parking brake is engaged.
• Ensure the power switch is in the “OFF” position.
• Ensure the air temperature is between 32ºF/0ºC to 120ºF/49ºC.
GETTING ONTO YOUR SCOOTER
1. Stand at the side of your scooter.
Never attempt to get onto or off your scooter with the scooter “ON”. Ensure parking
brake is engaged prior to sitting on the scooter.
2.Make certain that the seat is secured into position.
3.Position yourself comfortably and securely in the seat.
4.Make certain your feet are safely on the foot pedal.
OPERATING SCOOTER
The following can adversely affect steering and stability while operating your Scooter:
•
Holding onto or attaching a leash to walk your pet.
•
Carrying passengers (including pets).
•
Hanging any article from the handle-bar.
•
Towing or being pushed by another motorized vehicle.
Keep both hands on the handle-bar and your feet on the foot pedal at all times while
operating your Scooter. This driving position gives you the most control over your
vehicle.
1. Push power button on.
2. Release parking brake lever
3. Pull the appropriate side of the handle bar grips. Right if you want to go right, left if you want
to go left.
4. Always start in the lower speed. Lightly press accelerator, make scooter move forward
slowly, to be customed to speed of scooter before use maximum speed.
5. To go straight, move to the center position.
6. To go left, turn handle-bar left. To go right, turn handle-bar right.
7. To stop, release the accelerator and engage the brake handle.
10
