manualshive.com logo in svg

Super Products Camel 1200 (Dump Body), Operator'S Manual

The Super Products Camel 1200 (Dump Body) operator's manual is available for free download on our website. This comprehensive manual provides detailed instructions on operating and maintaining your dump body. Access the manual at 88.208.23.73:8080 to ensure optimal performance and longevity of your product.

Share
Download
background image

TOC-2

Publication: 0028607

JOB SITE SAFETY AND HAZARD WARNINGS — CONTINUED . . . . . . . . . . . . . . . . . . . . . . . . 1-15

Inspect the Job Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . 1-15
Visibility Conditions When Operating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-15
Prepare the Job Site  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-15

VACUUM EQUIPMENT OPERATION SAFETY AND HAZARD WARNINGS  . . . . . . . . . . . . . . . 1-16

Emergency Stop Button Function  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-16

VACUUM EQUIPMENT OPERATION SAFETY AND HAZARD WARNINGS — CONTINUED . . 1-17

Vacuum Operation Safety  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-17

VACUUM EQUIPMENT OPERATION SAFETY AND HAZARD WARNINGS — CONTINUED . . 1-18

Pre-Start Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-18
Vacuum Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-18

VACUUM RELIEF VALVE SAFETY  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-19

Vacuum Relief Valves  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-19
Operating the T-Type Vacuum Relief Valve  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-19

VACUUM RELIEF VALVE SAFETY — CONTINUED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-20

Testing the T-Type Vacuum Relief Valve  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-20

VACUUM RELIEF VALVE SAFETY — CONTINUED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-21

Operating the Remote-Operated Vacuum Relief Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-21

VACUUM RELIEF VALVE SAFETY — CONTINUED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-22

Testing the Remote-Operated Vacuum Relief Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-22

HIGH-PRESSURE WATER SAFETY AND HAZARD WARNINGS — CONTINUED . . . . . . . . . . 1-24

High Water Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-24

DUST HAZARD AND EXPLOSION PREVENTION SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-25

HYDROCARBON WASTE RECOVERY  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-26

Controlling Lower Explosive Level (LEL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-26

High-Temperature Prevention . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-27

Static Charge Dissipation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-28

SPARK AND FIRE PREVENTION SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-29

DEBRIS BODY DUMPING SAFETY AND HAZARD WARNINGS . . . . . . . . . . . . . . . . . . . . . . . . 1-30

SEWER GAS SAFETY AND HAZARD WARNINGS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-31

Confined Space Hazard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-31

Trenching Hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-32

DE-ENERGIZE AND LOCKOUT PROCEDURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-33

HAZARDS WITH EQUIPMENT MAINTENANCE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-34

Before Performing Service, Repairs, and Maintenance on the Equipment . . . . . . . . . . . . . 1-34
Performing Service, Repairs, Lubrication, and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 1-34
Safety Shields, Guards, and Safety Devices Inspection  . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-34

DECAL LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-35

Debris Body Tailgate Props . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-50

Unlocking the Tailgate Props and Raising the Debris Body Tailgate  . . . . . . . . . . . . . . . . . 1-50
Lowering the Debris Body Tailgate and Storing the Props  . . . . . . . . . . . . . . . . . . . . . . . . . 1-50

PREPARATION BEFORE TRAVELING TO WORKSITE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-51

Summary of Contents for Camel 1200 (Dump Body)































































































































































Reviews:

No comments

Related manuals for Camel 1200 (Dump Body)

Omcan 19978 Instruction Manual preview
19978
Brand: Omcan Pages: 16
Eoslift M Series Operating Instructions Manual preview
M Series
Brand: Eoslift Pages: 14
Daimler Freightliner Business class M2 Series Maintenance Manual preview
Freightliner Business class M2 Series
Brand: Daimler Pages: 149
MAKINEX PHT2-140 Operator'S Manual preview
PHT2-140
Brand: MAKINEX Pages: 37
Hexagon MT-45 Service Manual preview
MT-45
Brand: Hexagon Pages: 98
Granit 76072170 Operating Instructions Manual preview
76072170
Brand: Granit Pages: 24

Brands by name

Popular brands

Load more brands