SUPER STEAM X5
63
CLEANING AND MAINTENANCE
BE SURE THAT THE UNIT IS DISCONNECTED FROM THE POWER
OUTLET WHEN PERFORMING CLEANING.
Drain the remaining water in the tank and clean the tank after
every use.
Please use detergent to clean the accessories (Jet Nozzle and
Round Brush) when they are dirty, then wash with clean water and
air dry.
How to decalcify the Water Tank interior:
To clean calcium deposits that build up inside the Water Tank,
add one or two tablespoons of white vinegar to a full Water Tank,
close the Water Tank cap and shake the contents. DO NOT TURN THE
STEAMER ON.
Let the unit sit for a few hours. Then, empty the Water Tank and
refill with clean water and empty until it rinses clear.
DO NOT IMMERSE THE SUPER STEAM X5 IN WATER.
• Cleaning procedure to remove lime scale
If your SUPER STEAM X5 begins to produce steam more slow-
ly than usual or stops producing steam you may need to remove
lime scale. Lime scale can develop over time on the metal parts and
greatly affect mop performance.
It is necessary to remove lime scale on a regular basis, every 25
- 50 times you use a full tank of water or at least once a month, espe-
cially in areas with hard water. The frequency of lime scale removal
depends upon the hardness of your tap water and how often you
use the steam mop.
The SUPER STEAM X5 uses tap water. However, in areas with
hard water, distilled water should be used for better performance.
To remove lime scale from the SUPER STEAM X5, please follow
these procedures:
