SUPER STEAM X5
64
CLEANING AND MAINTENANCE
By using Scraper
1) Make sure that the SUPER STEAM X5 is disconnected from the
power supply before maintenance.
Do not leave the steamer unattended during the lime scale re
-
moval process and/or while in use.
Perform a test cleaning on a suitable isolated area after each lime
scale removal to ensure that there is no debris left in the system.
By using cleaning solution
1) Prepare a solution of 1/3 white vinegar and 2/3 tap water
and add to the water tank.
2) Secure and position the unit to ensure steam released is
aimed away from the floor or surrounding objects and surfaces. Plug
the unit in, turn the unit ON by pressing the Power Switch (O/I) and
allow the unit to produce steam until the vinegar/water solution is
used up.
3) Repeat the above procedure as many times as necessary un-
til a normal steam flow rate is achieved.
4) Fill the Water Tank with fresh water and rinse out.
5) Fill the Water Tank with fresh water, attach to the unit and
release steam through the system until the Water Tank is empty.
2) Use the Cleaning Pin to remove
scale deposits from the small hole of the
steam outlet in the Main Body, as illus-
trated in Fig. 2.
By swirling and pushing the pin up and
down you will clean the steam outlet.
Always ensure that all scale debris have
been removed from the steam outlet be-
fore reassembling.
Continue swirling Cleaning Pin until no further debris is evident.
DANGER OF SCALDING