Super CL, Operation Manual

6

3. 

Maintenance and Repair

 • 

Precauctions

 1. Turn The Power To OFF Position & Disconnect The Power

 2. Drain AllThe Fluid From The Filter And Close The In/Outlet.

 3. Service personnel Must Wear Protective Clothing.( Gloves Boots
     Goggle & Etc.)

 4. Make Sure The Pump Is Not Siphoning From The Tank.

*

Filter Part

Judging By Visual- Check The Capacity Of Liquid Flowing Out From The Filter. 

      If The Discharge Is Very Low, Take Apart The Filter Material For Cleaning.

Filter Maintenance

1. Put The Cartridges And Tamis Bags Into 5% HCl Solution. Soak Them

     For 3-5 Hours, And Then Clean Them With Water.

     *(Please Do Not Scrub The Cartridge and Tamis bags)

2. Rinse The Filter Medium With Clean Water.

*3. Filter Maintenance Card (Pg.24)For Routine Filter Maintenance and Request.

*   

Do Not Exceed 80% of Its Pressure Range. Barrel Are Design To Withstand

     Maximum of  3kg of Pressure.

Judging On Cartridge Replacement

Put The Cleaned Cartridge Into The Filter And Start The Filter.If The

     Pressure Increases Quickly,It Means That The Cartridges Are Seriously

     Blocked.It Has Become Ineffective, And Must Be Replaced.