SC809 Chassis Manual
6-4
6-5 Rack Mounting Instructions
This section provides information on installing the SC818G chassis into a rack unit
with the rails provided. There are a variety of rack units on the market, which may
mean that the assembly procedure will differ slightly. You should also refer to the
installation instructions that came with the rack unit you are using.
NOTE:
This rail will fit a rack between 26" and 33.5" deep.
Identifying the Sections of the Rack Rails
The chassis package includes two rack rail assemblies in the rack mounting kit.
Each assembly consists of two sections: an inner fixed chassis rail that secures
directly to the server chassis and an outer fixed rack rail that secures directly to
the rack itself.
SCALE 0.500
Figure 6-1: Identifying the Sections of the Inner and Outer Rack Rails
(right side rack rail shown)
Inner Rail Extension -
Attach to the Chassis
Outer Rack Rails -
Attach to the Rack
Inner Rail -
Preattached to the Chassis
Figure 6-2: Inner Rails and Inner Rail Extension Installed
