4-22
X10SBA/X10SBA-L User’s Manual
4-4 Security Settings
This menu allows the user to configure the following security settings for the
system.
Administrator Password
Use this feature to set the administrator password which is required to enter the
BIOS setup utility. The length of the password should be from 3 characters to 20
characters long.
User Password
Use this feature to set a user password which is required to log into the system
and to enter the BIOS setup utility. The length of the password should be from 3
characters to 20 characters long.
Secure Boot Menu
Secure Boot
Select Enable for secure boot support to ensure system security at bootup. The
options are Enabled and
Disabled
.
Secure Boot Mode
This feature allows the user to select the desired secure boot mode for the system.
The options are Standard and
Custom
.
Main
Advanced
Security
Boot
Exit
:
Select Screen
:
Select Item
Enter: Select
+/- :
Change Opt.
F1 :
General Help
F2 :
Previous Values
F3 :
Optimized Defaults
F4 :
Save & Exit
ESC : Exit
Set Administrator Password.
Password Description
If ONLY the administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be
in the following range:
Minimum
length
3
Maximum
length
20
Administrator Password
User Password
Secure Boot menu
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Summary of Contents for X10SBA
Page 1: ...X10SBA X10SBA L USER S MANUAL Revision 1 0a ...
Page 22: ...1 14 X10SBA X10SBA L User s Manual Notes ...
Page 54: ...2 32 X10SBA X10SBA L User s Manual Notes ...
Page 81: ...Chapter 4 AMI BIOS 4 21 Link Status MAC Address Virtual MAC Address ...
