Chapter 4: AMI BIOS
4-19
•
SPS Version
•
ME FW (Firmware) Status Value
•
ME FW State
•
ME FW Operation State
•
ME FW Error Code
•
ME NM FW Status Value
•
BIOS Booting Mode
•
Cores Disabled
•
ME FW SKU Information
•
End-of-POST Status
Super IO Configuration
Super IO Chip NCT6776F
Serial Port 1 Configuration
Serial Port
Select Enabled to enable the onboard serial port. The options are
Enabled
and
Disabled.
Change Port 1 Settings
This feature specifies the base I/O port address and the Interrupt Request ad
-
dress of Serial Port 1. Select
Auto to let the BIOS automatically assign the base
I/O and IRQ address. The options for Serial Port 1 are
Auto
, (IO=3F8h; IRQ=4),
(IO=3F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10,
11, 12), (IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12) and (IO=2E8h; IRQ=3, 4, 5,
6, 7, 9, 10, 11, 12).
Serial Port 2 Configuration
SOL Serial Port
Select Enabled to use Serial Port 2 as a SOL (Serial_Over_LAN) Serial Port for
remote console support. The options are
Enabled
and Disabled.
