2-34
X10SLX-F User’s Manual
JBT1
JP9
T-SGPIO2
T-SGPIO1
BIOS
LICENSE
IPMI CODE
MAC CODE
BAR CODE
JIPMB1
JSD1
SP1
LED3
LED2
JD1
LED5
LED1
BIOS
XDP1
JPI2C1
BT1
JPW1
JTPM1
JF1
FANA
FAN3
FAN1
FAN2
FAN4
JPL4
JPL3
JPL1
JPL2
JPME2
JPG1
JBR1
JPB1
JPME1
J19 J18
JVR1
J22
JI2C1 JI2C2
JOH1
JL1
JP2
JP1
JP7
SLOT4 PCI-X 133/100MHZ
SLOT1 PCI-X 133/100MHZ
SLOT2 PCI-X 133/100MHZ
SLOT3 PCI-X 133/100MHZ
PCH SLOT5 PCI-E 2.0 X1
USB8(3.0)
VGA
LAN2
LAN1
USB2/3 USB0/1
IPMI_LAN
COM2
COM1
DIMMB1
DIMMB2
DIMMA2
DIMMA1
PCH SLOT6 PCI-E 2.0 X4(IN X8)
CPU SLOT7 PCI-E 3.0 X8
JRK1
I-SA
TA5
I-SA
TA4
I-SA
TA0
I-SA
TA3
I-SA
TA2
I-SA
TA1
USB5/6
CPU
J7
JWD1
IPMI
LED4
JSTBY1
USB7(3.0)
USB4
FP
CTRL
JPW2
X10SLX-F
Rev
.1.00
Intel PXH
Intel PCH
BMC
LAN
CTRL
LAN
CTRL
SW1
C
A. JI
2
C1
B. JI
2
C2
C. JBR1
A
B
I
2
C Bus to PCI-Exp. Slots
Use Jumpers JI
2
C1 and JI
2
C2 to connect
the System Management Bus (I
2
C) to
PCI-Express slots to improve PCI slot
performance. These two jumpers are
to be set at the same time. The default
setting is Closed to enable the con
-
nections. See the table on the right for
jumper settings.
I
2
C to PCI-E slots
Jumper Settings
Jumper Setting Definition
Closed
Enabled (Default)
Open
Disabled
BIOS Recovery Enable
Jumper JBR1 is used for BIOS recovery.
Close Pins 2/3 of JBR1 to recover the
BIOS settings to the manufacture default
settings for emergency BIOS recovery.
The default setting is on Pins 1/2 for
normal operation. See the table on the
right for jumper settings.
BIOS Recovery Enabled
Jumper Settings
Jumper Setting Definition
Pins 1-2
Normal (Default)
Pins 2-3
BIOS Recovery