®
Page
2
of
8
SECTION 03 35 43 Updated April 6, 2011
C.
Other Tests:
1.
Reflectivity.
1.03
SUBMITTALS
A.
Prior to commencement of work submit all product data sheets for
concrete densifiers/hardeners, grinding equipment, vacuum systems, joint
fillers and diamond tooling to be used.
B.
Installation contractor’s qualification history/data.
C.
Manufacturer’s Certification – Provide a letter of certification from
product manufacturer(s) stating that the installer is a Lavina SPS System
certified applicator and is familiar with the proper procedures, surface
preparations and installation requirements recommended by the
manufacturer(s).
D.
Samples: Prior to commencement of work provide 10’ x 10’ finished
samples for the Owner’s review. See 1.06 Mock-Up.
E.
Provide maintenance procedures for the polished concrete floor to the
Owner’s Representative.
1.04
QUALITY ASSURANCE
A.
Installer Qualifications: Installer shall be an InovaCrete
®
certified applicator
regularly engaged in the installation of polished concrete floor system.
B.
Single Source Responsibility: All required materials and installation personnel
to be provided by the installing contractor.
C.
Pre-pour Meeting: The contractor shall conduct an onsite meeting before the
pour/placement of the concrete slab related to this section with the Owners
Representative, concrete finishing contractor and concrete polishing
contractor to review requirements necessary for a successful polished floor
surface.
