®
Page
6
of
8
SECTION 03 35 43 Updated April 6, 2011
D.
Grinding tools by Superabrasive, Inc.
1.
Quick Change Metal bonded diamonds: 30, 50, 70, 120 grits
2.
Calibra Ceramic bonded diamonds: 30, 50, 100, 200 grits
3.
V-Harr
®
Resin bonded diamonds: 120, 220, 400, 800, 1800, 3500, 8500
grits
E.
High speed burnisher – minimum 27 inch head generating 2,200 rpm or
greater.
F.
V-Harr
®
Diamond impregnated burnishing pads by Superabrasive, Inc.
G.
Penetrating liquid hardener/densifiers such as Prosoco LS/CS Lithium
Densifier/Lavina SPS Premium Densifier by Prosoco.
H.
SL/85 polyurea polymer, semi-rigid joint filler by VersaFlex.
I.
SLX 100 Oil repellent sealer by Prosoco.
J.
Ameripolish Decorative Dyes by American Decorative Concrete.
K.
Prosoco LS Guard/Lavina SPS Floor Glow by Prosoco.
PART 3 EXECUTION
3.01
EXAMINATION
A.
Verification of Conditions: Examine surfaces scheduled to receive the work of
this section for defects that will adversely affect the execution and quality of
the work. Do not proceed until unsatisfactory conditions are corrected.
Provide in writing to Owner a list of the conditions.
B.
New Concrete: Confirm that a minimum of 28 days has elapsed before
installation can begin. Also confirm if curing agents or hardening agents have
been applied.
3.02
PREPARATION
A.
Cleaning and preparation:
1.
Remove paint droppings by scraping, solvent stripper, and damp cloth.
Do not use stripper with acidic pH.
