Superabrasive
User Manual Original Language
Lavina® 30GEB
1/2021
15
ENGINE TACHOMETER
Displays the current engine speed (in RPM). This should be used to assess proper idle, WOT and engine speed for
the appropriate tooling.
JOB TIMER
The job timer feature works when it is activated and while the engine is running, and will not continue to run if the
engine is stopped. The job timer allows for easy timing of jobs or work areas to help determine speed.
PASSWORD PROTECTION
Located in the options menu, the password feature allows a maintenance manager or owner to enable a password
that prevents the user from resetting the Service Due alerts without the appropriate pin.
SERVICE ALERTS
The Fuel-Minder also provides equipment-specific service alerts for the following items:
Air Filter
Oil Filter
Spark Plugs
Seal Replacements
Chain Inspections
Belt Inspections
Tooling Inspections
Each item has individual alerts at different hour intervals, and the Fuel-Minder will start alerting the user of
upcoming maintenance within 3 hours of when it is due. To reset a particular service alert, simply scroll to it, using
the
+
or
-
buttons, then hold the reset button for 2 seconds. The meter will then prompt you to reset that interval.
SLEEP MODE
To conserve equipment battery life, theFuel-Minder will enter sleep mode if there are no key inputs or engine
activity.The backlight will dim after 30 seconds of inactivity, then turn off after 1 minute. The display will turn off
after 2 minutes. To wake from sleep mode, simply press any key or start your engine.
MAIN MENU NAVIGATION AND USE
This section outlines how to navigate the menu and interact with certain features.
MAIN MENU
The Main Menu contains the following screens, which can be viewed by simply using the
+
and
-
buttons to scroll.
Please note: Upon startup or waking from sleep mode, the first screen shown is always Engine Hours.
-
Engine Hours (Default screen)
-
Clean Filters
-
Oil Filter
-
Spark Plugs
-
Chain Inspections
-
Seal Replacements
-
Belt Inspections
-
Tooling Inspections
-
Battery Voltage
-
Tachometer
-
Options Menu
LED ALERTS & RESETTING SERVICE INTERVALS
The Fuel-Minder will alert you when service is due by blinking a red LED within 3 hours of the specified interval and
displaying “Service Due” on the LCD screen. When you see this light, simply scroll through your menu to see which
service item is due. To reset a specific interval, just scroll to that particular screen (for example, Oil Change), then
hold the
SELECT
button for 2 seconds until you see the reset prompt ,then press the
+
button to reset that interval.
