Superabrasive
User Manual Original Language
Lavina® 30GEB
1/2021
16
OPTIONS MENU NAVIGATION AND USE
OPTIONS MENU
To enter the options menu, simply scroll until
Options Menu
is displayed on the screen, then press
SELECT
. The first
option displayed by default is
Add Password
. Use the
+
or
–
buttons to scroll and view other options. To exit the
options menu, scroll until you see
EXIT OPTIONS
, then press
SELECT.
Add Password-
This option allows you to add a password that prevents unauthorized users from resetting service
intervals or performing a factory reset. This is a 4-digit pin that you set.
Change Password
-Allows you to change your password, if one is saved. Note: This option is hidden unless a
password has been created.
Remove Password
-Used to disable the password feature, if a password is saved. Note: This option is hidden unless
a password has been created.
Factory Reset
-CAUTION, this option will erase all memory and restore your device to factory condition. This also
allows for resetting the total engine hours. Password required if set.
Factory Unlock
-This option is only used by Superabrasive and requires a factory assigned pin number to activate.
Tach Settings
- This allows you to adjust the tachometer for a carbureted or fuel injected engine. It should come pre-
set to the correct option and will not require changes.
Equipment Hours
- This displays the total number of hours on your equipment and is non-resettable.
Date of Purchase
-This can be used by the user or dealer to record the equipment purchase date. To enter the date,
hold
SELECT
for 2 seconds; a cursor should appear under the MM. Use the
+
and
–
buttons to change the month field,
then press
SELECT
to move to the Day field. Again, use the
+
and
–
buttons to select the desired day. Once you have
the desired date, hold
SELECT
for 2 seconds and a prompt to save the information will appear.
Engine Info
- To view the engine model/serial information, scroll to
Engine Info
in the Options Menu, and press
SELECT
. To edit this information, hold
SELECT
for 2 seconds. Then use the
+
and
–
buttons to select the appropriate
letters and numbers. Press
SELECT
quickly to move the cursor, or hold
SELECT
for 7 seconds to save/exit.
Equipment Info
- To view the equipment model/serial information, scroll to
Equipment Info
in the Options Menu,
and press
SELECT
. To edit this information, hold
SELECT
for 2 seconds. Then use the
+
and
–
buttons to select the
appropriate letters and numbers. Press
SELECT
quickly to move the cursor, or hold
SELECT
for 7 seconds to save/exit.
Job Timer
- The job timer acts as a stopwatch, but only starts and stops when the engine is turned on/off. This allows
you to accurately time how long your engine runs for a particular job.
Exit Options
-Returns to the main menu, and default screen (Engine Hours).
SAFETY INFORMATION
Safety Information- Read all safety information before using this device to ensure safe and proper use.
Do not
interact with the device while operating your equipment. Doing so may distract your attention and cause an
accident, or may be illegal depending on your region.
Avoid
any direct contact with pressure washers, water sprayers or cleaning chemicals of any kind.
Do not
drop or cause an impact to the device.
Do not
bend or twist the device and/or the wire harness excessively.
Do not
disassemble, modify or repair your device. This product contains no user serviceable parts.
FCC Part 15.21
Any changes or modifications to this device that are not expressly approved by the manufacturer may void the user’s
authority to operate the device.
