Superabrasive
Owner’s manual original language – Lavina
®
V20E
01/2020
14
7. OPERATING WITH THE VACUUM
IMPORTANT:
Before connecting the power cord to the power source, ensure that the electrical
voltage corresponds with the requirements identified on the information plate on the vacuum
cleaner. Make sure that the flexible vacuum hose is securely attached to vacuum cleaner inlet.
Inspect the power cable (and extension cords) for any signs of wear or damage. Replace if necessary.
Toggle the motor switches to the “1” position to turn on the motors, and “0” position to turn them
off.
CAUTION:
Before switching the dust collector motors “on,” always make ensure that they are at a
complete rest before energizing. Also, before connecting the power supply, be sure the “start”
switches are down.
7.1 LOCKING CASTER WHEEL
There is one locking caster wheel located on the front of the
dust collector. Locking the wheel will prevent the vacuum from
moving, and possibly causing damage or injury. The wheel should be
locked on uneven surfaces to prevent unexpected rolling or movement.
To lock or unlock the caster wheel, follow the procedure shown below.
• To lock the caster wheel, press down on the metal tab
• To unlock the caster wheel, press backwards on the metal tab
protruding from the top of the wheel assembly.
Figure 7.1
