Superabrasive
Owner’s manual original language – Lavina
®
V20E
01/2020
7
2. GENERAL INFORMATION
This owner’s manual is intended for the operator of the Lavina
®
V20E machine, the servicing
technician as well as for anyone involved with operating or servicing the machine. We recommend
that you read the instructions very carefully and follow them strictly. The manual includes
information about assembling, using, handling, adjusting and maintaining your Lavina
®
V20E concrete
dust collector.
2.1 MANUFACTURER
Superabrasive was founded in 1987, as a manufacturer of high quality diamond tools for the
stone and concrete industry. Today, Superabrasive is one of the world’s leading companies in the
production of diamond tools and floor grinding machinery. At Superabrasive, we strive to deliver the
very best solutions to our customers, and enable them to work more efficiently.
2.2 GENERAL DESCRIPTION
Lavina® V20E dust collector is designed for sucking and separating dry, non-combustible and
non-explosion dust. Dust laden air is sucked through at high speed via the suction hose. The air is
slowed down by the cyclone and coarse dust particles are separated out, partly by centrifugal force
and partly by gravity. Air and finer particles then pass through filter system from the primary filter
and the HEPA filter where the dust is separated. The machine is designed to clean the primary filter
by impulse reverse air flow. The separated dust accumulates in the cyclone until you close the valve
situated on the vacuum’s hood to discharge the dust from the body or the machine is switched off.
Either way the dust drops through the bottom flap into the plastic bag.
Lavina® V20E dust collector has one hose:
-Main hose with cuff for the wand;
WARNING!
The dust collector Lavina
®
V20E is manufactured and fitted for the above-mentioned applications
only! Every other use may possess risks to the persons involved.
