Mounting Bracket, rear, Locations
Fig. 1
Do not tighten hardware completely unless noted.
1. Install rear of Mounting Brackets (B)(C) with
M10-
1.50 x 20mm Lg. HHCS (D). See Fig. 1 and Fig.
2. Front of Mounting Brackets (B )(C) mount with
M10-1.50 x 20mm Lg. SHCS (E).
See Fig. 3.
2. Install Fairlead Plate (A) with M8-1.25 x 20mm Lg.
HHCS (F) and M8-1.25 Nylock Nuts (G). See Fig.
4.
3. Tighten all hardware completely.
4. Install Winch and wire according to Winch
Instructions. To determine mounting location see
Winch Mounting.
Use Washers when Mounting Winch
4500 Lb. Winch Mounting
3500 Lb. Winch Mounting
Fig. 2
C
D
B
A
F G
(Driver Side Shown)
A
E
F G
A
Fig. 4
E
B
C
E
Fig. 3
Minor interference, between Winch and Radiator
Hose, may occur in some installations. Use Flex
Loom or applicable material to prevent.
Winch
Hose
(View from Passenger Side)
