Selectable CCT LED Flood Light
Important: Read all instructions prior to installation.
FLCCT Series
4400 Earth City Expy, St. Louis, MO 63045
866-590-3533 superbrightleds.com
Rev Date: V0.1 01/21/2020
5
yr
User Manual
Installation Instructions (Optional Pole/Slip-fitter Mount)
light
wires
water-proof gasket
cover of junction-box
screw
knuckle mount
wiring
connections
hex
screw
Drill
Wall
hex-key
hex-key
cover screw
selection
switch
Round Pole
Mounting Only
Square and Round
Pole Mounting Only
light
wires
water-proof gasket
cover of junction-box
screw
knuckle mount
wiring
connections
hex
screw
Drill
Wall
hex-key
hex-key
cover screw
selection
switch
Round Pole
Mounting Only
Square and Round
Pole Mounting Only
light
wires
water-proof gasket
cover of junction-box
screw
knuckle mount
wiring
connections
hex
screw
Drill
Wall
hex-key
hex-key
cover screw
selection
switch
Round Pole
Mounting Only
Square and Round
Pole Mounting Only
Pole/Post Installation
1. Disassemble mount and run wiring through it.
2. Reassemble mount.
3. Attach mount to light.
4. Drill mounting holes in pole/post and
attach mount.
Note: Installation on square poles will not require
round pole adapter plate or gasket. See illustration.
5.
With supply power off, use access panel
to connect wiring.
6. Rotate light head to desired angle and
tighten adjustment screw.
Slip-fitter Installation
1. Disassemble mount and run wiring through it.
2. Reassemble mount.
Note: Discard Pole/Post mount components.
3. Attach mount to light.
4.
With supply power off, connect wiring.
5. Slide mount over pole/post and secure in place.
The maximum pole/post diameter is 2.375 in.
6. Rotate light head to desired angle and tighten
adjustment screw.
Only available on 70 W and 90 W lights.
