High Watt LED Flood Lights
User Manual
Part Number:
Important: Read all instructions prior to installation.
FLCU Series
4400 Earth City Expy, St. Louis, MO 63045
866-590-3533 superbrightleds.com
Rev Date: V1 09/30/2021
5
yr
Instructions
flat wahser
wall
screw
hammer
expansion bolt
electrical drill
spring washer
screw nut
allen wrench
flat wahser
wall
screw
hammer
expansion bolt
electrical drill
spring washer
screw nut
allen wrench
1.
Use the mounting bracket to mark out bolt holes
on the wall and then drill holes.(Fig 1)
2.
Drive the bolts into the holes with the
threading facing outward.(Fig 2)
3.
Place the mounting bracket over the bolts
and push it flush with the wall.(Fig 3)
flat wahser
wall
screw
hammer
expansion bolt
electrical drill
spring washer
screw nut
allen wrench
4.
Fasten the nuts on the bolts to tighten the
mounting bracket to the wall.(Fig 4)
5.
Rotate the light to the desired angle and
tighten screws with an allen driver. (Fig 5)
