background image

Grace Industries, Inc.

1

SuperCELL® Model SC500-IC-GPS User’s Information

Power 
Menu 
Button

Up 1 
Message 
Button

Up 5 
Messages
Button

Down 1 
Message 
Button

Down 5 
Messages
Button

Power 
Select
Button

Antenna

LCD
Display

Front View

Top View

Back View

Swivel Clip

Operation

Status LED

Swive

Introduction

SuperCELL® Model SC500-IC-GPS 

is an intrinsically safe, 

high performance, RF-wireless, emergency signaling and 
monitoring device, critical for Incident Commanders. 
A self-contained GPS continuously tracks location and 
transmits this location along with the user’s status to other 
Grace Telemetry products, including the MX900H.

SuperCELL® monitors distress alarm signals of fi re fi ghters 

equipped with GRACE TPASS® devices. SuperCELL® can also 
transmit Evacuate signals to all fi re fi ghter’s TPASS® devices. 

Features

• Top Button EVAC:

 Pressing the top button sends an 

Evacuate command to all other GRACE TPASS® and 
SuperCELL® devices. 

• Alarm Monitoring:

 Alerts the Incident Commander that 

a GRACE Man-Down telemetry device, within signaling 
range, is transmitting an alarm message. 

• Panic ALARM:

 Manually activated Emergency Alarm. 

•  Man Down Alarm:

 An optional safety monitoring feature 

which provides the Incident Commander with motion 
sensing protection. 

• Alarm Acknowledgment:

 When a SuperCELL® is in an 

alarm condition, an Alarm Acknowledgment message 
can be sent from an MX900 transceiver. This will clear the 
alarm condition and display the Alarm Ack message.

• Canned Text Messaging:

 Allows Incident Commander 

to send and receive pre-set Canned Text Messages to 
other SuperCELL® devices and In-Command® monitoring 
systems. 

Specifi cations

• Model:

 SC500-IC-GPS, Incident Commander. 

• Dimensions:

 2-3/16” wide, 1-3/8” deep (without clip), 5” 

high (with antenna). 

• Weight:

 5.6 oz.

• Internal Battery:

 3.7 V nominal, 1960 mAh, intrinsically 

safe, lithium-ion rechargeable. 

• Device Run Time:

 Approximately 24 hrs. in Sensing Mode, 

and 8 hrs. in Alarm Mode. 

• Radio Frequency:

 ISM license free, spread spectrum. 

•  Battery Charger Operational Voltage:

 120VAC or 12VDC.  

Available international power adapters rated for 100-240VAC 
input, with UL, FCC, CE,        safety ratings.

• Battery Charge Time:

 6 - 8 hrs.

• Certifi cations:

 

• 

Intrinsically Safe UL913, CSA C22.2 No. 157

• 

IP67

• Radio Certifi cations:

• 

FCC ID:  J5XT3HEP

• 

IC:  5916A-T3HEP

• 

Australia / New Zealand: Compliant to ACMA AS/NZS 
CISPR22:2006, Class A Digital Apparatus | AS/NZS 4268:2017 
for Intentional Radiators

• 

EMC93142A-ACMA

• 

EMC93142A-AS/NZS 4268

Table of Contents

Quick Start Guide 

2

Menu Screens 

3

Defi nition of Terms 

8

Warranty Information 

8

SC500-IC-GPS UI 2020-01

EVAC

Button

GPS Antenna

GPS 

Antenna

Summary of Contents for SC500-IC-GPS









Reviews: